MOTION CONTROL | Motion Controllers
AMCI’s motion controllers include PLC modules that provide 1, 2, or 4 axis of motion, and network ready multi-axis controllers. AMCI’s motion module capabilities range from low-cost simple stepper applications, to more complex applications requiring closed loop positioning and servo technologies.
3601 CompactLogix Motion Controller Module
- Value driven single-slot module design
- Enhanced motion profiles
- 1 MHz maximum output frequency
- Can also be used as a single-axis stepper or servo controller
- 3601 User Manual
3602 CompactLogix Motion Controller Module
- 2-axis motion controller
- Enhanced motion profiles
- 200 kHz maximum output frequency
- Use for Stepper or Servo control
- 3602 User Manual
3202 & 3204 ControlLogix Motion Controller Module
- 2 or 4 axis controller in a single – slot module
- Encoder feedback for move verification
- Direct interface with AB ControlLogix PLC
- Can also be used as a multi-axis servo controller
- 3204 Motion Controller Product Manual
3601 MicroLogix Motion Controller Module
- Value driven single-slot module design
- Enhanced motion profiles
- 1 MHz maximum output frequency
- Can also be used as a single-axis stepper or servo controller
- 3601 User Manual
3602 MicroLogix Motion Controller Module
- 2-axis motion controller
- Enhanced motion profiles
- 200 kHz maximum output frequency
- Use for Stepper or Servo control
- 3602 User Manual
ANF1 & ANF2 AnyNET – I/O Motion Controllers Networked I/O
- 1 or 2-axis motion controllers
- Encoder feedback for closed loop motion control
- Use for Servo or Stepper control
- Compatible w/ today’s leading PLCs or PACs
- ANF1 & ANF2 User Manual
3102 & 3102i MicroLogix Motion Controller Modules
- 2-axis motion controller
- Encoder feedback for closed loop positioning
- Use for Servo or Stepper control
- Simplified programming via RSLogix500
- 3102 User Manual
3401 Point I/O Motion Controller Module
- Value driven single-slot module design
- Enhanced motion profiles
- 200 KHz to 1 MHz maximum output frequency
- Can also be used as a single-axis stepper or servo controller
- 3401 User Manual
4402 Point I/O Pulse Width Modulation Controller Module
- 2-channel PWM controller
- 24 Vdc output voltage
- 1Hz to 20 kHz maximum output frequency
- 0-100% programmable duty cycle (<10kHz)
- 4402 Point I/O Pulse Width Modulation Manual
3501 – HSTP1 SLC500 Motion Controller Module
- Value driven single-slot module design
- Enhanced motion profiles
- 250 KHz maximum output frequency
- 100% compatible with entire line of AMCI stepper drives and motors
- Can also be used as a single-axis stepper or servo controller
- 3501 – HSTP1 User Manual
ANG1 AnyNET – I/O Integrated Stepper Motor Controller
- Integrated Stepper controller AND driver
- 1 to 6 axis of motion control – buy what you need, expand later!
- Hybrid control: Servo performance using Stepper hardware
- Programming is easy, no additional software required
- ANG1 User Manual
NX1F4 & NX1F2 NEXUS Motion Controller
- Network ready 2 or 4 axis controller
- Encoder feedback for move verification
- Enhanced motion profiles
- Industry leading warranty and support
- NX1F4 User Manual