MTL5521 Loop Powered Solenoid Driver IIC
- Loop-powered module which enables a device located in the hazardous area to be controlled from the
safe area - Can drive a certified intrinsically safe low-power load, as well as non-energy-storing simple apparatus such as an LED
- MTL4521-L-5521 Data Sheet
MTL5523 Solenoid Driver with LFD
- An on/off device in a hazardous area can be controlled by a volt-free contact or logic signal in the safe area
- Suitable for driving loads such as solenoids
- Includes line fault detection (LFD)
- MTL4523-R-5523 Data Sheet
MTL5524 Switch Operated Solenoid Driver
- Enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area
- Can be phase reversed
- MTLx524 Data Sheet
MTL5526 2ch Switch Operated Relay
- Enables two separate IS circuits in a hazardous area to be contact controlled by one or two, on/off, control signals in a safe area
- Output–relay contacts are certified as non–energy–storing apparatus, and can be connected to any IS circuit without further certification
- MTLx526 Data Sheet
MTL5522 Loop Powered Solenoid Driver IIB
- Loop-powered module which enables a device located in the hazardous area to be controlled from the
safe area - Can drive a certified intrinsically safe low-power load
- Input/output isolation allows the control switch to be connected into either side of the 24V dc supply circuit.
- MTL5522 Data Sheet
MTL5523V – VL Solenoid/Alarm Driver with Voltage Control
- An on/off device in a hazardous area can be controlled by a voltage signal in the safe area
- It is suitable for driving loads such as solenoids
- Includes line fault detection (LFD)
- MTLx523V-VL Data Sheet
MTL5525 Loop powered Solenoid Driver Low Power
- Enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area
- Can drive loads such as solenoids, alarms, LEDs and other low power devices that are certified as intrinsically safe
- MTLx525 Data Sheet