skip to Main Content
+61 2 4964 4022 sales@automatedcontrol.com.au
Arrow
Arrow
Sense | Monitor | Control
Shadow
Slider

MOTION CONTROL | Stepper Drives

AMCI offers several different AC and DC powered microstepping drives providing a wide range of power outputs. Features include compact design, versatile mounting, and simplified set-up.

Every product is designed for optimum performance and years of trouble free operation. Our stepper and servo motion control products can be integrated into existing systems to improve  performance and ensure reliability.

 

AMCI-Logo
SD7540A

SD7540A Stepper Motor Driver

  • Speeds up to 50 rps (3000 rpm)
  • 400, 1000, 2000, and 5000 steps per turn, programmable
  • 24Vdc – 75Vdc supply voltage
  • Programmable output current up to 4.0 Arms (5.6 A peak)
  • Amplifier disable input
  • Programmable idle current reduction
  • SD7540A  User Manual
sd17040c

SD17040C Stepper Motor Driver

  • Simple and easy set-up via onboard dip switches
  • AC line-powered – NO POWER SUPPLY REQUIRED
  • Switch selectable motor current, 1.0 – 4.0 Amps
  • (16) switch selectable microstep resolutions, up to 50,800 steps/rev.
  • Drives 4, 6, or 8 lead step motors, Nema sizes 23 – 42
  • Automatic idle current reduction, fully programmable
  • SD17040C Stepper Motor Driver Manual
sd17040c

SD17060B Stepper Motor Driver

  • Direct replacement for AMCI SD17060 stepper motor drive
  • User selected Disable/Enable input can be selected to perform either function
  • Simplified set-up via onboard LED diagnostic indicates specific fault condition
  • 170 V bus, outputs current up to 6.3 Arms, selectable in 0.1A increments
  • Automatic current reduction
  • User-selectable gain for fine tuning performance
  • SD17060B User Manual
SD17060

SD17060 Networked Integrated Stepper Motor Controller and Drive

  • Built-in network interface for variety of networks
  • Ethernet interface option offers DLR (Device Level Ring)
  • Programming is easy! No additional software is required.
  • AMCI’s SD17060 Networked Series uses familiar stepper commands
  • SD17060A2 User Manual
sd17040c

SD31045 Stepper Motor Driver

  • Speeds up to 50 rps (3000 rpm)
  • 16 user selectable step resolutions up to 50,800
  • Input frequency up to 2MHz
  • Outputs current up to 4.5 Arms, selectable in 0.1A increments
  • Automatic current reduction
  • User-selectable current loop gain for performance fine tuning
  • SD31045 Stepper Motor Driver Manual
SD17060

SD31045 Stepper Motor Controller and Drive

  • Built-in network interface for variety of networks
  • Ethernet interface option offers DLR (Device Level Ring)
  • Programming is easy! No additional software is required.
  • AMCI’s SD31045 Networked Series uses familiar stepper commands
  • SD31045A2 User Manual
Back To Top