skip to Main Content
+61 2 4964 4022 sales@automatedcontrol.com.au
previous arrow
next arrow
Shadow
Slider

MTL5511 1ch DI Relay Output Switch Amplifier

Rated 0 out of 5
(be the first to review)

The MTLx511 Switch Amplifier enables a safe-area load to be controlled by a switch or
proximity detector located in a hazardous-area.

SKU: MTL5511 Category:
logo-mtl-Boxed

Description


MTL5511 1ch DI Relay Output Switch Amplifier

The MTLx511 enables a safe-area load to be controlled by a switch or
proximity detector located in a hazardous-area. When selected, open
or short circuit conditions in the field wiring are detected by the linefault-detect
(LFD) facility and also indicated on the top of the module.
Phase reversal for the channel is selected by a switch on the side of the
module and output is provided by changeover relay contacts.

  • One Channel
  • Switches can be located in Zone 0, IIC, T6 hazardous area  if suitably certified or
    Div. 1, Group A hazardous location
  • Hazardous Area Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR)
  • Safe-area output: Single pole relay with changeover contacts. Note: reactive loads must be adequately suppressed
  • MTLx511 Data Sheet

Brand

MTL Instruments

MTL Intrinsically Safe Cameras, Barriers and Power Supplies
logo-mtl-Boxed

Reviews

There are no reviews yet.

Be the first to review “MTL5511 1ch DI Relay Output Switch Amplifier”
Back To Top